Trucrux Inc

Mounting EMMC Guide

Mounting eMMC as Mass Storage  #

NOTE: Plug the USB-C Type OTG cable securely into the designated port on the device and to the host PC. #
Enable USB Mass Storage on eMMC 
Interrupt U-Boot by pressing Enter repeatedly during the boot 
-$ums 0 mmc 0 
Step 2: Identify eMMC Device on your host PC & Check for the eMMC device among the connected devices.
$ls /dev 
Identify the eMMC device in the list of connected devices to make sure emmc is successfully mounted as mass storage.